Skip to main content

Quality Inspector Mechanic (Rotating Shifts)

L5

airbusMobile, ALtoday
A320 Customer Line Quality Inspector Mechanic (Rotating Shifts) Airbus Americas, Inc is looking for an A320 Customer Line Quality Inspector Mechanic (Rotating Shifts) to join our team based in Mobile, AL. The A320 Customer Line Quality Inspector Mechanic (Rotating Shifts) is responsible for the planning, execution and verification of the A320 Quality activities in the Flightline and Delivery phases, starting from the milestone FOT in the FAL to the final delivery to the customer. This includes the demonstration of aircraft system integrity and conformity in accordance to the design specification by the verification of ground test instruction (GTI).
Key Responsibilities: Inspect, test, attest & conduct corrective action management Prevent & promote FOD eradication Manage Non conformities as appropriate Be the go-to person on the shop floor for Quality issues Carry out Improvement and Coaching as appropriate Your Challenges: L3 Flightline Quality Inspector 60 % Take accountability for the whole aircraft integrity during the Customer Line phase. Authorize and release aircraft for all ground and flight operations (including Engine Run-up Inspections, Pre- and Post-flight checks under EASA Part 21G, and post-transfer of title under FAA 14 CFR Part 145). Perform and advise Quality Inspections as per defined standards, Final Checks and Attestation, Stop Points, Out of sequence work, including critical activities. Conduct comprehensive aircraft system testing, evaluating and formally documenting test results and discrepancies in the Airbus Log Book (ALB). Perform and attest aircraft operational and functional tests following test instructions (GTI, RTI, AMM, etc.). Take responsibility for the safety of the people, and the Aircraft during operational and functional tests. Ensure and guarantee the traceability of completed maintenance tasks as well as the aircraft conformity. Lead and support complex troubleshooting (T/S) on integrated aircraft systems, taking accountability for troubleshooting during ground tests. Use problem-solving methods and tools for solving repetitive issues and participate in the continuous improvement of test procedures. Drive continuous quality improvement initiatives and resolve technical issues collaboratively with engineering teams, customers, and suppliers. Contribute to the aircraft technical status meeting during industrial milestones. Embody a "Customer Focus" oriented mindset, taking into account the feedback/experience of the Delivery Center to improve the customer satisfaction. Provide feedback and support to Operations & Support Functions on Quality issues and observations from Operational Surveillance. Contribute to deploy and support Airbus Operating System methodology- Quality Performance System (QPS) bricks : Practical Problem Solving (PPS), Customer Protection Board (CPB), Non Quality Management (NQM). Verify and certify aircraft conformity as a Quality Inspector holding final signature authorization. Depending on operational proficiency: Become the aircraft technical and quality focal point; manage activities & release aircraft for maintenance activities; release A/C to enter into service post maintenance activities. FAL-GTE (Final Assembly Line - Ground Test Engineer) 35 % Operate the aircraft in delegation of the flight test department, representing them by executing post-FOT aircraft ground checks, preparing testing environments, logging nonconformities in the ALB, and issuing Repeat Test Instructions (RTI) following rework completion. Perform the Airbus Log Book (ALB) opening and transfer all items affecting aircraft configuration, operation, test, airworthiness or flight safety into the ALB after the FAL Operational Test (FOT) acceptance. Execute static system tests, APU/Engine Destorage, low/high-power engine run testing, low-speed taxiing, and compass swings in strict compliance with the Production Aircraft Test Manual (PATM) and Ground Test Instructions (GTIs). FAA Part 145 Repair Station Inspector 5 % Perform aircraft testing, evaluate technical outcomes, and document findings and discrepancies within the Part 145 Work Package. Execute advanced troubleshooting and system diagnostics across complex aircraft systems. Maintain regulatory compliance of the Part 145 Work Package and execute official Release to Service authorizations.
Additional Responsibilities: Perform additional operational duties and special projects as assigned Your Boarding Pass: High School Graduate or equivalent Airbus A320 T1 & T2 training preferred 3 years of Quality Inspection experience preferably on A320 Family aircraft in an aviation company FAA issued A & P license or EASA Part 66 license (for FAA 14 CFR Part 145 activities after Transfer of Title) Experience in troubleshooting Airframe/Powerplant Systems Flightline experience preferred Leadership experience Knowledge of drawing systems, inspection plans and inspection processes Knowledge of inspection principles, practices, methods and tools used on the production line Knowledge of rules for aircraft design and manufacturing Clear and precise English communication skills, able to give direction Proven experience in the performance of GTI's (Ground Test Instruction) Airframe/Powerplant System Licensure/Certifications: FAA issued A & P license or EASA Part 66 license (for FAA 14 CFR Part 145 activities after Transfer of Title)
Travel Required: 10 % Domestic and International Eligibility: Eligible for employment in the US without sponsorship.
Physical Requirements: Vision: adequate to read material (electronic or paper), aircraft gauges, airport signage, safety labels and signage. Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. Speaking: able to clearly communicate in English, in person or via electronic means, and deliver information to groups of varying size with or without amplification. Equipment Operation: Able to operate personal and office electronic equipment. Able to operate Powered Industrial equipment and work on jigs for fuselage access at a height of 15 feet. Able to operate and work on hydraulic lifts sometimes at a height of up to 40 feet. Working Conditions/Physical Demands (for ex. Lifting, working in heights): Environment will be a mix of office time and outdoor activities. Capable of supporting a two shift system and occasional weekends, based on business needs. Willingness to maintain second shift once qualified is preferred. Carrying: able to occasionally carry up to 55 lbs/25kg while engaging in work, training, addressing production issues, or as part of continuous improvement projects. Lifting: able to occasionally lift up to 55 lbs/25kg. Pushing/Pulling: able to push/pull items in your work environment. Sitting: able to sit for extended periods of time at computer, in meetings, or on aircraft. Squatting/Kneeling: able to work on or in the wing or center wing box, in a confined space. Entrance into the wing by a 9.8 inch x 17.7 inch oval opening. Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Standing: able to stand for extended periods of time, delivering information. Travel: able to travel overseas and domestically sometimes for extended periods of time. Walking: able to walk through office and production areas, around flightline, hangars and ramp, sometimes on uneven indoor and/or outdoor surfaces.
Apply now (opens in a new tab)
Apply now (opens in a new tab)

Level

SeniorL5

Location

Mobile, AL

Occupation

Quality Control Systems Managers

Industry

Other Support Activities for Air Transportation

Posted

today

To get sharper similar jobs, create your profile using the link below.

Create profile