Facilities Specialist II (Parks)
$37.00/hour
Apply now (opens in a new tab)Facilities Specialist II (Parks)
L5
$37.00/hour
Occupations
Maintenance and Repair Workers, GeneralFacilities ManagersInstallation, Maintenance, and Repair Workers, All OtherIndustries
Nature Parks and Other Similar InstitutionsFacilities Support ServicesAll Other Amusement and Recreation Industries- Works in a team environment to manage daily building operations and ensure safe, efficient, and clean Parks, Recreation, Arts, and Golf facilities.
- Conducts regular facility inspections to identify maintenance needs, safety hazards, and system issues.
- Monitors, operates, and troubleshoots building systems to maintain reliable facility performance.
- Manages vendor work, including coordination, oversight, and quality verification.
- Leads preventative maintenance and facility improvement projects to enhance safety, efficiency, and usability. Electrical Work
- Installs, programs, troubleshoots, and repairs a wide range of control systems, including DDC Building Management, Lighting, Refrigeration Plant Controls, PLCs, Distributed Audio, Power Quality Monitoring, heavy equipment/Zamboni controls, and other facility systems.
- Works with 3-phase, 480V equipment, transformers, switchgear, motor control centers, and standard power distribution components.
- Installs, programs, and repairs electro-mechanical devices such as motors, starters, compressors, pumps, refrigeration and chemical controls, valves, transducers, meters, sensors, relays, lighting circuits, alarms, access control devices, and other facility-related components.
- Calibrates and standardizes sensitive electronic equipment including pressure transmitters, ammonia and gas detection units, chemical feeders, oxygen concentrators, ozone generators, and other facilities management instruments.
- Uses specialized tools including Megger testers, scopes, power quality monitors, tachometers, volt-ohm meters, gas calibration equipment, combustion analyzers, IR detectors, shaft alignment systems, desoldering tools, conduit benders, and other shop equipment.
- Maintains integrity and functionality of plant and facility safety systems.
- Leads, interprets, and creates wiring diagrams and schematics as needed. Specialized Technical Responsibilities
- Performs diagnostic, maintenance, and repair work across five (5) Parks, Recreation, Arts, and Golf facilities, ensuring alignment with organizational values and mission.
- Applies specialized skills and certifications in one or more areas, including: o Mechanical or electrical engineering degrees or applied physics o Journeyman's or Master's electrical licenses o Low voltage electrical and controls work, ladder logic, controls programming, or board-level repair o Industrial ammonia refrigeration, including overhauling reciprocating compressors Commercial and Industrial Refrigeration Systems, HVAC
- Maintains and repairs commercial and industrial refrigeration and HVAC systems, including associated controls and safety devices.
- Performs preventative maintenance, inspections, adjustments, and operational checks to ensure efficiency and reliability.
- Responds to system alarms, equipment failures, and service requests.
- Reads and follows refrigeration and HVAC schematics, procedures, and safety requirements.
- Utilizes specialized refrigeration tools and equipment such as ammonia monitors, manifold gage sets, vacuum pumps, leak detectors, refrigerant recovery units, SCBA, harmonic tensioners, torque wrenches, load-cells, etc. Mechanical
- Troubleshoots/repairs/modifies/upgrades a wide variety of machinery including but not limited to air compressors, steam generators, regenerative blowers, ozone generators, scrubbers, vacuums, ice edgers, Zambonis, pressure washers, exercise equipment, HVAC equipment, refrigeration equipment, combustion burners, rotary compressors and blowers, gate operators, dampers/actuators, de-humidification equipment, man-lifts, tractors, trailers, hoists, lifts etc.
- Utilizes specialized tools and equipment related to mechanical specialties such as gear pullers, bearing presses, arbor presses, hydraulic presses, torque wrenches, impact wrenches, etc. Machinist/Shop
- Performs machining, fabrication, welding, and repair work to support facility operations and maintenance.
- Uses shop equipment to fabricate or modify parts, fixtures, and components.
- Maintains shop equipment, tools, and work areas in a safe and serviceable condition.
- Reads blueprints and performs layout, fixturing, and fabrication tasks.
- Utilizes specialized tools and equipment such as granite surface plates, height gages, micrometers, depth micrometers, bore gages, dial indicators, vee-blocks, depth indicators, edge-finders, center finders, internal/external calipers, gage blocks/pins, post grinders, drill sharpeners, tool sharpeners, layout tools, dressing tools, hoists, reamers, broaches, etc. Plumbing
- Installs/Maintains/Repairs plumbing fixtures, water supply plumbing, hydronic heating systems, refrigeration plant glycol side loops, sanitary sewer systems, water softeners, boilers, pumps, zone valves, PVC plumbing systems, filtration systems, reverse osmosis systems, lift stations, check valves, flow valves, butterfly valves, ball valves, filters, etc.
- Utilizes specialized tools and equipment including: pipe milling and trenchless pipe repair equipment, pipe taps and dies, pipe cutters, brazing torches, PEX expanders/crimpers, soldering torches, pipe benders, swaging tools, flaring tools, extractors, strap and pipe wrenches, etc. Record Keeping and Procurement
- Documents inspections, maintenance activities, repairs, and system conditions in electronic and manual systems.
- Completes work orders, maintenance logs, and required documentation accurately and in a timely manner.
- Identifies required materials, parts, and services and follows established purchasing and approval procedures. General Building Maintenance
- Performs a variety of maintenance tasks, including carpentry (framing, finish, cabinets, Corian counters, shelves, doors, woodshop work).
- Handles seasonal duties such as snow removal, plowing, ice dam mitigation, seasonal equipment setup, gutter cleaning, roof/pipe repairs, winterization, and safety barrier installation.
- Completes painting projects, including surface prep, masking, cut-in, and application using brushes, rollers, and sprayers.
- Installs, repairs, and replaces tile, including grout removal, restoration, and sealing, using specialized tools and diamond saws.
- Performs concrete work, including mixing, cutting, finishing, polishing, staining, and stamping decorative concrete.
- Operates heavy equipment (front-end loaders, backhoes, man lifts, tractors, dump trucks, snowblowers); CDL training provided as needed. Safety
- Actively promotes a safe work environment for employees and the public.
- Follows safety policies, procedures, lockout/tagout requirements, and standard operating practices.
- Uses required personal protective equipment (PPE) and completes required safety training.
- Identifies hazards and reports or assists in correcting unsafe conditions.
- Participates in specialized training as needed (e.g., lockout/tagout, confined space, HazWopper, equipment procedures, ammonia refrigeration). City Organizational Values: Supports and models the City of Aspen organizational values: Service, Partnership, Stewardship, and Innovation. Organizational values are shared principles that guide behavior across the organization. This position is responsible for upholding and applying these values while performing daily work functions. Other duties as assigned.
- Service: Provides service with excellence, humility, integrity, and respect in daily work, builds trust by listening, treats people with respect, acknowledges opportunities for improvement, and follows through with commitments.
- Partnership: Actively creates strong, supportive internal and external relationships to attain a common goal and achieve greater impact together.
- Stewardship: Balances social, environmental, and financial responsibilities, evaluating the impact of decision making on a thriving future for all.
- Innovation: Develops technical expertise to pursue new ideas and creative outcomes, grounded in Aspen's unique culture, opportunities and challenges.
- Communication: Knowledge of effective and appropriate communication. Ability to use knowledge effectively in various contexts which may require oral, written, visual and non-verbal communication.
- Interpersonal: Works to develop strength in interpersonal skills. Has the ability to work well with diverse groups of people, both inside and outside the organization.
- Technology: Demonstrates technology skills sufficient for the nature and level of position. Demonstrates a willingness to learn new technologies and transition job duties accordingly to support technological advances and innovation.
- Electrical Equipment Expertise: Knowledge of and ability to use electrical equipment, components, instruments, and systems, including their design, installation, testing, uses, repair, or maintenance.
- Mechanical & Tools Expertise: Knowledge of and ability to use machines and tools, including their designs, installation, uses, repair, and maintenance. Ability to use milling machines, lathes, hydraulic presses, welding equipment, band saws, table saws, core drills, routers, grinding equipment, sanding equipment, polishing equipment, drain snakes, paint sprayers, hoists, man-lifts, pullers, dial indicators, and other precision shop tools.
- Must possess a valid Colorado Driver's License or be able to obtain one within 30 days of start date. Required Licenses (must have at least one):
- Electrical/Controls Experience: Demonstrated skill in low-voltage electrical and controls work, including ladder logic, controls programming, or board-level repair. OR
- Industrial Ammonia Refrigeration Experience: Certifications and hands-on experience with industrial ammonia refrigeration, including the ability to overhaul reciprocating compressors. Other Preferred Licenses: Aspen Confined Space Certification, IIAR Ammonia Operator Certifications, Pool Operations Certifications (AFO, CPO), CDL, electrical Journeyman's or Master's electrical license(s) Preferred Candidate:
- Skilled in operating machinery including engine lathes, Bridgeport vertical milling machines, hydraulic presses, rotary tables, grinders, and drill presses. Experienced in welding (wire-feed), brazing, oxyacetylene cutting, metal bending/forming, and safe rivet installation.
- Knowledgeable in plumbing systems, including Wirsbo/PEX installation and valve rebuilding.
- Experienced with DDC controls, particularly JCI and/or Delta systems.
- Holds or is eligible for an Electrical License.
- Evenings/Weekends: May be required in addition to or instead of normal hours depending on department needs and special projects.
- Special Events: May be required to work Special Events during holiday periods, such as the 4th of July parade and fireworks display.
- Indoors: Office environment and public recreation facilities that will require exposure to wet, humid conditions, work near moving mechanical parts, extreme cold and extreme heat. There is also risk of electrical shock.
- Outdoors/Off-Site: Meetings, trainings, and site visits at a variety of city facilities and areas. Site visits to outdoor recreation facilities. Position will be exposed to outdoor working conditions in all types of weather.
Level
SeniorL5
Salary
$37.00/hour
Location
Aspen, CO
Occupation
Maintenance and Repair Workers, General
Industry
Nature Parks and Other Similar Institutions
Posted
13 days ago
To get sharper similar jobs, create your profile using the link below.