Gathering insights
Loading resources
As Principal Air Defense Systems Engineer, you will be using your skills and expertise to support the execution of a portfolio of Ground Based Air Defense programs within SNC's Mission Systems Integration (MSI) directorate. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. SNC is a global leader in aerospace and national security committed to moving the American Dream forward.
In this pivotal role, as an Aircraft Maintenance Manager at our client, you’ll oversee all maintenance activities within a Part 145 Repair Station, ensuring compliance with FAA regulations and company policies.. Valid FAA Airframe and Powerplant (A&P) certification.. Minimum 5 years of aviation maintenance experience, including 2+ years in a managerial role (Part 145 preferred).. MRO & Aftermarket Services – Aircraft maintenance, repair, overhaul, and parts distribution. Aviation Technology & Manufacturing – OEMs, avionics, propulsion, and emerging technologies
We’re designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts.. Senior Avionics Systems Integration Engineer. Join Castelion and play a pivotal role in advancing the development of next-generation hypersonic missile systems.. Support hardware-in-the-loop (HIL) testing, flight operations, and post-flight assessments, ensuring real-time system health monitoring and issue resolution. Contribute to the development and validation of advanced avionics capabilities, including power systems, sensors, vehicle networks, RF, and control systems
KP Staffing is now hiring a Hardware Engineering Manager for an aerospace manufacturing facility in Fort Worth, TX!. For over 70 years, this organization has been a pioneer in aviation technology, driven by a mission to improve flight safety and operational performance through advanced avionics solutions.. With a long-standing legacy of innovation—from the early days of jet-powered flight to today’s cutting-edge aerospace systems—the team remains committed to pushing the limits of what’s possible in aviation.. 9+ years’ experience with electrical and electronic engineering including instrumentation.. Strong knowledge of hardware design principles, embedded systems, PCB design, and hardware/software integration.
As Principal Air Defense Systems Engineer, you will be using your skills and expertise to support the execution of a portfolio of Ground Based Air Defense programs within SNC's Mission Systems Integration (MSI) directorate.. Additionally, the individual will be a critical member of proposal teams responsible for follow-on business and on contract growth as well as helping shape and lead its strategic direction and future growth to include IRAD. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems.. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems.. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants.. SNC is a global leader in aerospace and national security committed to moving the American Dream forward.
Our exciting Space client in the LA area are looking for a Principal Communication Systems Engineer to work across cutting-edge Communication Systems for Satellites, Spacecraft, and Aerospace systems.. In this position, you will lead the development of space architecture concepts, sub-system design, payload design, requirements development, analysis and decomposition, high-level software and hardware system architecture design, concept of operations (CONOPS) development, and risk assessment.. Lead development of sub-system design, payload design, requirements development, analysis and decomposition, hardware system design, Link budget studies, gain line up, cascade analysis, array simulation studies, concept of operations (CONOPS) development, and risk reduction.. Background and practical experience with FPGA & modern vector processing engines.. Experience with and understanding of satellite-communications standards (NR NTN, DVB-S2x, CCSDS).
Responsibilities Iron EagleX is seeking a highly skilled Unmanned Systems Engineer to support the development, integration, and fielding of unmanned aerial systems (UAS) in support of national security and defense missions.. This role will focus on Group 1 and Group 2 drone platforms and will require advanced knowledge of distributed systems, onboard compute integration, and mission planning software.. Design and implement hardware and software solutions for drone payloads, sensors, and onboard compute platforms.. Implement onboard compute systems using platforms such as NVIDIA Jetson, Intel NUC, or similar embedded computing environments.. Hands-on experience with drone systems integration, onboard compute, and hardware/software troubleshooting.
Our client, a manufacturer of turbojet engines, is seeking a Jet Propulsion Engineer who will design and optimize jet propulsion systems, contributing to the development of high-performance aircraft engines.. Design : Design and development of jet propulsion components and systems, ensuring compliance with performance, safety, and regulatory standards.. 2+ years of work experience in jet propulsion engineering or a related aerospace field, with a proven track record of successful projects.. Expertise in propulsion system design, thermodynamics, fluid mechanics, and materials used in aerospace applications.. Familiarity with advanced manufacturing techniques and emerging propulsion technologies.
In this position, you will be responsible for manufacturing various thermal protection systems (TPS) for New Glenn flight hardware according to written procedures, engineering models, drawings, and specifications.. Responsible for the manufacture of thermal protection systems (TPS) through multiple processes including adhesive bonding, heat cleaning, waterproofing, CNC quilting, material processing, inspection, and packaging.. Proven expertise in one or more of the following: two-part RTV bonding, operation of CNC machinery, CO2 Lasers, chemical spray mixing and application, vacuum infusion, automated systems operation and troubleshooting, and Hazardous waste treatment and handling.. Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.. Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
As a Solid Rocket Propulsion Engineer, You Will. BS degree in Aerospace or Mechanical Engineering (or similar), with 10 years of experience with the design and analysis of rocket propulsion systems. Strong knowledge with associated phenomenology, including fluid dynamics, thermodynamics, thermochemistry, heat transfer, and structures. The referenced pay range is based on JHU APL’s good faith belief at the time of posting.. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.
Operating at altitudes 20 times closer to Earth than Low Earth Orbit (LEO) satellites, our drones deliver superior 5G direct-to-device communication and ultra-high-resolution imagery. As a Guidance, Navigation, and Controls (GNC) Engineer, you will be responsible for designing, implementing, and optimizing the flight control systems that enable reliable operations of our solar-powered drones in the challenging stratospheric environment. Collaborate with hardware, software, and aerospace teams to integrate GNC systems seamlessly into the drone platform. Experience in GNC system design and implementation, preferably in aerospace or UAV applications. Proficiency in developing and implementing GNC algorithms using tools such as MATLAB/Simulink and programming languages like C/C
The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Bachelor’s degree in mechanical, aerospace, manufacturing engineering, or equivalent. Ability to rapidly iterate NX CAM programs and operate 5-axis CNC equipment. Experience machining turbomachinery and combustion device components. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum.
JOB TITLE: Structures & Payload Design Engineer III (REMOTE).. We are a staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams!. Manage supplier development, testing, and production activities, ensuring optimal design and program goals are met. The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design
Your expertise in aerospace manufacturing, assembly, and integration will be essential in delivering high-quality products that meet our stringent performance and reliability requirements. 5+ years of experience in aerospace manufacturing, assembly, and integration. Familiarity with industry standards and best practices in aerospace manufacturing, such as AS9100 or similar quality management systems. Experience with manufacturing tools and software, such as CAD/CAM, PLM, or ERP systems. Community events like monthly office BBQs, pickleball tournaments, a run club and more!
Utilize CAD/CAM software and simulation tools to create and validate manufacturing models, tooling designs, and production layouts.. Material Selection and Processing: Evaluate materials, coatings, and treatments for use in aerospace manufacturing applications.. Develop and implement material processing methods, such as machining, forming, welding, and additive manufacturing.. Tooling and Fixturing: Design and procure specialized tooling, fixtures, and equipment to support aerospace manufacturing operations.. Proficiency in CAD/CAM software (e.g., CATIA, SolidWorks, NX) and manufacturing simulation tools.
About Us: X-Bow Systems is a cutting-edge aerospace technology company focused on revolutionizing propulsion systems for space exploration and defense applications.. Our team of innovative engineers and scientists is committed to pushing the boundaries of what's possible in rocket propulsion.. The ideal candidate will have extensive experience in circuit design for safety-critical applications, high voltage pulsed power systems, PCB layout, microcontroller/FPGA integration, and testing.. Proficiency in circuit design, high voltage pulsed power, PCB layout, and microcontroller/FPGA integration.. Experience with simulation and design software (e.g., Altium, MATLAB, etc.)
We are developing the future of Army Aviation with the Bell V-280 Valor Future Long-Range Assault Aircraft (FLRAA), part of the US Army's Future Vertical Lift (FVL) modernization effort, and a next generation stop-fold tilt-rotor as part of the DARPA SPRINT program. Experience/Familiarity with software development in an embedded or real-time operating systems (RTOS) environment utilizing Model Based Design (MBD) techniques with tools such as MathWorks MATLAB / Simulink with Stateflow and Embedded Coder. Experience/Familiarity with the hardware and software associated with Flight Control Systems, Avionics, Electrical System, engine controllers (e.g. FADECs), inertial sensors, air data computers, analog sensors, mission systems, crew stations, and/or actuation devices.. You'll need a Bachelor's degree, with a Major in Electrical Engineering, Computer Engineering, Aerospace Engineering, Mechanical Engineering, or Computer Science being preferred. The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
The T-38 Aerospace Propulsion Technician inspects, maintains, modifies, tests, and repairs propellers, turboprop and turboshaft engines, jet engines, small gas turbine engines, and engine ground support equipment (SE).. Coordinates with the designated propulsion systems manager to analyze scheduled removal intervals.. May be required to perform maintenance on aircraft, including avionics, mechanical systems, and/or ground support equipment.. Knowledge of mechanical, hydro mechanical, electrical, and hydraulics principles applying to jet and turboprop engines.. Must have current practical experience on maintaining, servicing, removing, and installing General Electric J85-GE-5 turbojet with afterburner propulsion system or similar systems.
Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. Build and maintain a fly-by-wire aircraft according to aviation standards using shop and calibrated tooling including torque wrenches, crimping and stripping tools.. Perform developmental, experimental and production aircraft maintenance, repair, modification, installation, and testing tasks; taking direction from others as needed.. Maintain aircraft maintenance records required by FAA regulations, manufacturer recommendations, and company policy.. Experience working with CAD, NX, Confluence, JIRA
Description: Join Our Team as an ASIC & FPGA Design Engineer where you will support over 50 different programs and research and development (R&D) efforts, affecting technology across military space, civil space, commercial space, missiles, missile defense platforms, satellite surveillance platforms, deep space exploration, and manned flight missions.. The Silicon Solutions team of Lockheed Martin Space is building the best ASIC/FPGA team in the world, and are seeking a highly talented and motivated ASIC & FPGA Associate Engineering Manager to lead and manage a team of ASIC/FPGA design and verification engineers in executing design services for programs in the integration and test of microchip solutions.. Understand complex ASIC / FPGA design and verification considerations and methods, including Universal Verification Methodology (UVM).. Experience in leading or managing ASIC or FPGA projects.. Experience being a Control Accounts Manager (CAM) using Earned Value Management System (EVMS).